Manufacturers of CO Detector Carbon Monoxide Monitors Carbon Monoxide Detector Suppliers

CO or Carbon Monoxide is a colourless, odourless, tasteless, and extremely poisonous gas. It is formed by combustion of carbon in oxygen at high temperature, and also with oxygen by decomposition of carbon dioxide at very high temperature.

Sources of Carbon Monoxide

CO is generated in:

• Automobiles (exhaust of internal -combustion engines
• Coal Stoves
• Furnaces
• Gas appliances
• Ovens.
• Clothes Dryers

Carbon monoxide is a gas absorbed by lung quickly; the speed rate of combination of CO and hemoglobin is more than 250 times than with oxygen. This stops oxygen circulation around the body;which leads to heavy toxicity, so CO poisoning have became a big problem around the world. This requires the need for CO Monitor to detect and control the toxic gas.

Weiber's CO Detector (Carbon Monoxide Monitor) is ideal equipment for research and general applications by scientists and researchers in field of detection and controlling ambiance level of CO gas.

• Preset the 1st and 2nd alarm point for carbon monoxide measurement.
• LCD display CO level, temperature and humidity at the same time.
• Accurate performance
• Economical
• Back-up battery power

• Real Time Detection and controlling ambiance CO level.
• Detection of temperature
• Detection optional relative humidity.
• Real time monitoring carbon monoxide level with range from 0 to 1000ppm.
• Semiconductor sensor with 5 years long lifetime.
• LCD can display CO, temperature and humidity, also ventilation device status etc.
• Round the clock monitoring of CO level, even the slightest leak can be detected.
• Suitable to work as a alarm or controller of carbon monoxide, and also as a transmitter.
• Provide up to 1 analog signal output and 2 dry contact outputs.
• Provide RS485 communication Interface(optional), 15 KV antistatic protection, independent address setup.
• Provide up to 0~10V analog output and 2 relay dry contact outputs.
• Two alternatives for the analog output.

- Linearized over full range output or

- PID control output

• Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm.

• Suitable for prevention and monitoring of CO potential leak and a Controller of Ventilation System in Bellows Application
• Human Environment
• Industrial Environment
• Underground Parking Lot
• Freezing machine room
• Other places where air quality is easy to worsen